Kemlite Piping Solution
Bhuleshwar, Mumbai, Maharashtra
GST No. 27CAEPM9391J1Z2
TrustSEAL Verified
Call 0804896270187% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Kg |
| Material Grade | Hardox Plate |
| Thickness | 2-3 mm |
| Brand | KPS |
| Material | Hardox |
| Usage/Application | Industrial |
| Shape | Rectangular |
Hardox Plates are also known as wear plates which are designed to last longer than standard mild steel. The most common hardness levels in the category are 400 and 500. The combination of hardness, strength and toughness makes it stand up to extreme wear. This can replace expensive wear products like high chrome white iron and hard-faced overlay plates. Even though it is too tough, it can be cut, welded, milled and drilled using standard workshop practices.
Features
Application
Chemical Composition Content %, maximum (ladle analysis)
| Thickness mm Cut lengths | Heavy Plates | C | Si | Mn | P | S | AI | Cr | Ni | Mo | B |
| 3 - 12 | 5 - 30 | 0.20 | 0.70 | 1.70 | 0.030 | 0.015 | 0.060 | 1.50 | 0.40 | 0.50 | 0.004 |
| --- | (30) - 60 | 0.24 | 0.70 | 1.70 | 0.030 | 0.015 | 0.060 | 1.00 | 0.70 | 0.50 | 0.004 |
Mechanical Properties
| Thickness mm Cut lengths | Heavy plates | Yield strength Rp0,2 N/mm2 | Tensile strength Rm N/m2 | Elongation A5 % | Hardness range HBW | Impact strength t0C KV J |
| 3 - 12 | 5 - 15 | 1000 | 1250 | 10 | 360 - 420 | -40 40 |
| -------- | (15) - 30 | 1000 | 1250 | 10 | 380 - 450 | -40 20 |
| -------- | (30) - 60 | 1100 | 1400 | 8 | 380 - 480 | -40 20 |
Additional Information:
Product Details:
| Material Grade | Invar 36 |
| Type | Nickel |
| Thickness | 2-3 mm |
| Brand | Kemlite Piping Solution |
| Size | 12-150 |
| Material | Invar 36 |
| Usage/Application | Industrial |
| Shape | Rectangular |
We Serves following Countries
Additional Information:
Product Details:
| Thickness | 1-2 mm |
| Steel Grade | hardox |
| Material | Hardox |
| Material Grade | SS316 L |
| Brand | KPS |
| Usage/Application | Industry |
Send Enquiry
Hardox Plates are also known as wear plates which are designed to last longer than standard mild steel. The most common hardness levels in the category are 400 and 500. The combination of hardness, strength and toughness makes it stand up to extreme wear. This can replace expensive wear products like high chrome white iron and hard-faced overlay plates. Even though it is too tough, it can be cut, welded, milled and drilled using standard workshop practices.Features
Application
Chemical Composition Content %, maximum (ladle analysis)
| Thickness mm Cut lengths | Heavy Plates | C | Si | Mn | P | S | AI | Cr | Ni | Mo | B |
| 3 - 12 | 5 - 30 | 0.20 | 0.70 | 1.70 | 0.030 | 0.015 | 0.060 | 1.50 | 0.40 | 0.50 | 0.004 |
| --- | (30) - 60 | 0.24 | 0.70 | 1.70 | 0.030 | 0.015 | 0.060 | 1.00 | 0.70 | 0.50 | 0.004 |
Mechanical Properties
| Thickness mm Cut lengths | Heavy plates | Yield strength Rp0,2 N/mm2 | Tensile strength Rm N/m2 | Elongation A5 % | Hardness range HBW | Impact strength t0C KV J |
| 3 - 12 | 5 - 15 | 1000 | 1250 | 10 | 360 - 420 | -40 40 |
| -------- | (15) - 30 | 1000 | 1250 | 10 | 380 - 450 | -40 20 |
| -------- | (30) - 60 | 1100 | 1400 | 8 | 380 - 480 | -40 20 |
Additional Information:
4.5/5
Reviewed by 50 Users
Most Relevant Reviews